SpringLOCK - Anti-Theft for Wood Frames, Locks onto almost any standard screw in the wall.
SpringLOCK developed and made in the UK, has been proven in 1000's of installations in hotels, public buildings and restaurants around the world.
It works on any kind of wall material, including plasterboard.
SpringLOCK fits over almost any screw, 6, 8, or 10 in the wall. Leave 3mm clear under the heads. The Locks are pushed home with thumb pressure. They can only be removed with the special Release Tool.
A SpringLOCK is one Bridge and one Lock. They are supplied as kits in bags for single frames and in bulk packs.
There are two basic installation methods for SpringLOCK: Side-By-Side Method and Hang Plate Method.
Hang Plate Method:
Two Hang Plates, 4648 are screwed along the top of the frame. These fit over screws in the wall. A Bridge is fitted on the bottom of the frame.
A Marker Button is placed in the Bridge to mark the position of the lower, third, screw.
This screw is inserted and the marker button removed the frame is locked by placing the Bridge over the third screw and pushing home the Lock.
PH3943B Spring Lock Hang Plate Method Bulk Packed x 25 including a release tool
50 x slots
25 x locks
25 x bridges
1 x release tool
If you need to remove the art work later a tool to remove the SpringLock is necessary Release Tool
This tool also includes a clever marker button which is great for marking the SpringLock position on your wall.