SpringLOCK - Anti-Theft for Wood Frames, Locks onto almost any standard screw in the wall.

SpringLOCK developed and made in the UK, has been proven in 1000's of installations in hotels, public buildings and restaurants around the world.
It works on any kind of wall material, including plasterboard.

SpringLOCK fits over almost any screw, 6, 8, or 10 in the wall. Leave 3mm clear under the heads. The Locks are pushed home with thumb pressure. They can only be removed with the special Release Tool.

A SpringLOCK is one Bridge and one Lock. They are supplied as kits in bags for single frames and in bulk packs.

There are two basic installation methods for SpringLOCK: Side-By-Side Method and Hang Plate Method.

Hang Plate Method:
Two Hang Plates, 4648 are screwed along the top of the frame. These fit over screws in the wall. A Bridge is fitted on the bottom of the frame.

A Marker Button is placed in the Bridge to mark the position of the lower, third, screw.

This screw is inserted and the marker button removed.

Frame is locked by placing the Bridge over the third screw and pushing home the Lock.

Bag B, for the Hang Plate method, contains one SpringLOCK, two Hang Plates and six screws.

Please note:

A MINIMUM OF 1 RELEASE TOOL IS REQUIRED FOR REMOVAL

To remove frames later, SpringLOCK Release Tool is required.     

Install guide

** We may at our discretion ship order's for 10 or more as bulk packs.