No reviews found
Hanger - suitable for most aluminium frame profiles.
Fits easily into the channel of most double-plate aluminium frame profiles. Adjusted with two screws.
Fit AH3 Hangers in 4 simple steps:
1) Slot 2 AH3 Hangers into the aluminium frame. Position and mark approximately 1/3 of the way down from the top.
Put one screw in an oval hole of each hanger.
2) Position and fix the hooks, place two Post-its in approximate hook positions.
Check and mark hook positions on Post-its. Hold hook in position on mark.
Use a light hammer to insert pins.
3) Hang frame in place on the hooks and check for general position.
To adjust for level, use screw in a slot.
To lock CWH Hangers in position, insert second screw in each.
4) Frames will hang flat and level on the wall - do not tip forward.
Safe working load 11kg
No reviews found